brake bleeders-clutches There are 47 products.

Stainless steel air-operated and electric equipment for the bleeding of brakes and hydraulic clutches of every motor vehicle. Equipped with inside follower plate which allows the complete division between air and oil, avoiding the risk of emulsion.

The stuffs (Art.080-1788-000 – 080-1792-000) are equipped with a third air chamber which is filled with air at max 8 bar. Using a pressure reducer it is possible to make more bleeding operation with a constant pressure (1-2 bar) without any other filling in of air and oil. For vehicles with ABS brake system the max pressure is 1 bar.

• 
  Available

  Stainless steel brake bleeder-clutches with three chamber 6 l

  Stainless steel brake bleeder-clutches with three chamber 6 l Equipped with: Tank oil capacity6 l 4 mRILSAN spring hose 2 oil recovery basins1 l with rubber hose and pipette 90° 1 filling funnel

  Select to compare

  View
• 
  Available

  Screw plug model 1 Ø 25

  NOTE: For the choice of the connection plug, please look in the schedule “LIST OF PLUGS FOR BRAKE BLEEDERS AND CLUTCHES”

  Select to compare

  View
• 
  Available

  Kit standard plugs

  Kit standard plugs composed by: 5 plugs mod. 1-4-6-9-18 1 plug all marquees mod. 25

  Select to compare

  View
• 
  Available

  Screw plug model 2 Ø 21,5

  NOTE: For the choice of the connection plug, please look in the schedule “LIST OF PLUGS FOR BRAKE BLEEDERS AND CLUTCHES”

  Select to compare

  View
• 
  Available

  All marquees plug model 25 (with 1 conic pad)

  Can be used on all kind of cars and trucks behind those mentioned in the plugs list.

  Select to compare

  View
• 
  Available

  Screw plug model 3 Ø 26,5

  NOTE: For the choice of the connection plug, please look in the schedule “LIST OF PLUGS FOR BRAKE BLEEDERS AND CLUTCHES”

  Select to compare

  View